+1 601-680-9567
ORDER NOW

DNP 960 Topic 3 IRB – DPI-Committee-Approved Proposal Submission

DNP 960 Topic 3 IRB – DPI-Committee-Approved Proposal Submission

DNP 960 Topic 3 IRB – DPI-Committee-Approved Proposal Submission

You are required to submit your DPI-Committee-Approved DPI Project Proposal to iRIS by the end of this topic. Note: Learners are required to submit this assignment in full and according to the required instructions no later than Topic 7 of this course. Late submissions after Topic 3 will earn less than full points. Learners who do not submit this assignment as described by the end of Topic 7 will not pass this course, and will be required to retake DNP-960.

General Requirements:

Use the following information to assist you in executing the correct procedures for timely, successful completion of the assignment:

  1. APA format is required. Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center.
  2. You are not required to submit this assignment to LopesWrite.

Procedures:

  1. Review the resources within the IRB Documents Folder, located on the DC Network. Navigate to the IRB Documents Folder by selecting DNP Community, DNP Program Documents, DNP-960 Folder, and then the IRB Documents Folder.
  2. Read the “IRB Documents Checklist for DNP Learners,” located in the DNP-960 Folder.
  3. Review the IRB Submission Training Videos for iRIS.
  4. Review “How to Start Your Application in iRIS,” located in the DNP-960 Folder.
  5. With your chairperson, determine which documents you will need to submit for your IRB application, based on the “IRB Documents Checklist for DNP Learners,” located in the DNP-960 Folder.
  6. Use the following document templates as needed: informed consent, site authorization letter, recruitment script, confidentiality statement, conflict of interest form, and HIPAA authorization form, located in the DNP-960 Folder/IRB Documents Folder.
  7. Incorporate any/all feedback, as required from the DPI committee proposal defense process.
  8. Resubmit the DPI Project Proposal (if applicable) to your DPI committee for final approval.

DNP 960 Topic 3 IRB – DPI-Committee-Approved Proposal Submission

Directions for Submission:

Upload the following IRB application forms to the IRB portal, as they pertain to your specific DPI Project, and to the assignment drop box for your chairperson to review and approve:

  1. IRB Application Form – Complete the online application form in iRIS using the “How to Start Your Application in iRIS” and “How to Complete the Initial Submission Packet” resources, located in the DNP-960 folder. Save a PDF copy and submit it to the assignment drop box.
  2. DPI-committee-approved proposal with all required revisions.
  3. CITI training reports (human research basic course and RCR).
  4. Site authorization letter (on letterhead, signed, and dated by authorizing official) or IRB approval letter from the hospital or clinical site.
  5. Conflict of interest form – This is now included in the online application form in iRIS. Make sure to complete this section in the application.
  6. Confidentiality statement– This is now included in the online application form in iRIS. Make sure to complete this section in the application.

If applicable, also submit the following:

  1. Informed consent documents.
  2. Recruiting materials.
  3. Copies of surveys, instruments, interview questions or measures.
  4. Permission letters or e-mails to use the surveys and instruments (if needed).
  5. HIPAA Authorization Form.

After your chairperson has approved your application materials, follow the “Create a New Submission Packet in iRIS” resource instructions. Upload your chairperson-approved IRB documents and notify your chairperson that the project is ready to be submitted via the Individual Forum and in iRIS.

Important: Your DNP chairperson is the only individual who can submit your project in iRIS.

KINDLY ORDER NOW FOR A RESOURCEFUL, CUSTOM-WRITTEN AND PLAGIARISM-FREE PAPER

Portfolio Practice Hours:

Practice immersion assignments are based on your current course objectives, and are intended to be application-based learning using your real-world practice setting. These assignments earn practice immersion hours, and are indicated in the assignment by a Portfolio Practice Hours statement that reminds you, the learner, to enter in a corresponding case log in Typhon. Actual clock hours are entered, but the average hours associated with each practice immersion assignment is 10.

You are required to complete your assignment using real-world application. Real-world application requires the use of evidence-based data, contemporary theories, and concepts presented in the course. The culmination of your assignment must present a viable application in a current practice setting. For more information on parameters for practice immersion hours, please refer to DNP resources in the DC Network.

To earn portfolio practice hours, enter the following after the references section of your paper:

Practice Hours Completion Statement DNP-960

I, (INSERT NAME), verify that I have completed (NUMBER OF) clock hours in association with the goals and objectives for this assignment. I have also tracked said practice hours in the Typhon Student Tracking System for verification purposes and will be sure that all approvals are in place from my faculty and practice mentor.

DNP 960 Topic 6 DPI Project – Working Draft Chapter 4 or Negotiated Progress Deliverable

Once IRB approval for your Proposal is obtained, learners will commence the implementation phase of the DPI Project. For the remainder of the course, learners are expected to develop working drafts of Chapters 4 and 5 of the final DPI Project. These chapters will undergo further revision in DNP-965 with the requirement that the entire DPI Project will be submitted to the DPI Committee at the end of DNP-965.

If there is a delay in obtaining IRB approval, extensive revisions are required, or implementation issues arise that affect scheduled completion of DPI Project chapters, learners may not be able to submit DPI Project deliverables as prescribed in this course and may negotiate a progress deliverable instead. Dependent upon the development and progress status of the DPI Project at this time, students will submit one of the following options in this topic, as described below:

  • OPTION 1: DPI Project – Working Draft Chapter 4
  • OPTION 2: Negotiated Progress Deliverable

General Requirements:

For both deliverable options, use the following information to ensure successful completion of the assignment:

  • Remember to use the appropriate forms and templates (if required) for completing this assignment. These are available on the PI Workspace of the DC Network.
  • APA format is required for essays only. Solid academic writing is always expected. For all assignment delivery options, documentation of sources should be presented using APA formatting guidelines, which can be found in the APA Style Guide, located in the Student Success Center.
  • This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion
  • You are required to submit this assignment to LopesWrite. Please refer to the directions in the Student Success Center.

OPTION 1: DPI Project – Working Draft Chapter 4:

Submission of the completed DPI Project – Working Draft Chapter 4 is the recommended deliverable to progress through the DPI Project implementation phase.

  1. Locate the “Final DPI Project Template” in the PI Workspace area of the DC Network and utilize it to develop and submit initial and ongoing working versions of Chapter 4 of your DPI Project.
  2. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.

OPTION 2: Negotiated Progress Deliverable:

If you are unable to submit the above deliverable, you and your chair will have negotiated a Topic 6 Negotiated Progress Deliverable for this topic and included it in your Individual Success Plan (ISP) in Topic 1. You will submit the intended deliverable in this topic for the purpose of grading.

Locate your completed “Individual Success Plan” (ISP) document from Topic 1 of this course. Use it to determine what deliverable must be submitted during this topic.

  1. Complete the DPI Project deliverable planned for this topic.
  2. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.

KINDLY ORDER NOW FOR A RESOURCEFUL, CUSTOM-WRITTEN AND PLAGIARISM-FREE PAPER

Portfolio Practice Hours:

Practice immersion assignments are based on your current course objectives, and are intended to be application-based learning using your real-world practice setting. These assignments earn practice immersion hours, and are indicated in the assignment by a Portfolio Practice Hours statement that reminds you, the learner, to enter in a corresponding case log in Typhon. Actual clock hours are entered, but the average hours associated with each practice immersion assignment is 10.

You are required to complete your assignment using real-world application. Real-world application requires the use of evidence-based data, contemporary theories, and concepts presented in the course. The culmination of your assignment must present a viable application in a current practice setting. For more information on parameters for practice immersion hours, please refer to DNP resources in the DC Network.

To earn portfolio practice hours, enter the following after the references section of your paper:

Practice Hours Completion Statement DNP-960

I, (INSERT NAME), verify that I have completed (NUMBER OF) clock hours in association with the goals and objectives for this assignment. I have also tracked said practice hours in the Typhon Student Tracking System for verification purposes and will be sure that all approvals are in place from my faculty and practice mentor.

DNP 960 Topic 3 IRB – DPI-Committee-Approved Proposal Submission

DNP 960 Topic 7 DPI Project – Working Draft Chapter 5 or Negotiated Progress Deliverable

Once IRB approval for your proposal is obtained, learners will commence the implementation phase of the DPI Project. For the remainder of the course, learners are expected to develop working drafts of Chapters 4 and 5 of the final DPI Project. These chapters will undergo further revision in DNP-965 with the requirement that the entire DPI Project will be submitted to the DPI Committee at the end of DNP-965.

If there is a delay in obtaining IRB approval, extensive revisions are required, or implementation issues arise that affect scheduled completion of DPI Project chapters, learners may not be able to submit DPI Project deliverables as prescribed in this course and may negotiate a progress deliverable instead. Dependent upon the development and progress status of the DPI Project at this time, students will submit one of the following options in this topic, as described below:

  • OPTION 1: DPI Project – Working Draft Chapter 5
  • OPTION 2: Negotiated Progress Deliverable

General Requirements:

For both deliverable options, use the following information to ensure successful completion of the assignment:

  • Remember to use the appropriate forms and templates (if required) for completing this assignment. These are available on the PI Workspace of the DC Network.
  • APA format is required for essays only. Solid academic writing is always expected. For all assignment delivery options, documentation of sources should be presented using APA formatting guidelines, which can be found in the APA Style Guide, located in the Student Success Center.
  • This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.
  • You are required to submit this assignment to LopesWrite. Please refer to the directions in the Student Success Center.

OPTION 1: DPI Project – Working Draft Chapter 5:

Submission of the completed DPI Project – Working Draft Chapter 5 is the recommended deliverable to progress through the DPI Project implementation phase.

  1. Locate the “Final DPI Project Template” in the PI Workspace area of the DC Network and utilize it to develop and submit initial and ongoing working versions of Chapter 5 of your DPI Project.
  2. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.

OPTION 2: Negotiated Progress Deliverable:

If you are unable to submit the above deliverable, you and your chair will have negotiated a Negotiated Progress Deliverable for this topic and included it in your Individual Success Plan (ISP) in Topic 1. You will submit the intended deliverable in this topic for the purpose of grading.

Locate your completed “Individual Success Plan” (ISP) document from Topic 1 of this course. Use it to determine what deliverable must be submitted during this topic.

  1. Complete the DPI Project deliverable planned for this topic.
  2. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.

Portfolio Practice Hours:

Practice immersion assignments are based on your current course objectives, and are intended to be application-based learning using your real-world practice setting. These assignments earn practice immersion hours, and are indicated in the assignment by a Portfolio Practice Hours statement that reminds you, the learner, to enter in a corresponding case log in Typhon. Actual clock hours are entered, but the average hours associated with each practice immersion assignment is 10.

You are required to complete your assignment using real-world application. Real-world application requires the use of evidence-based data, contemporary theories, and concepts presented in the course. The culmination of your assignment must present a viable application in a current practice setting. For more information on parameters for practice immersion hours, please refer to DNP resources in the DC Network.

To earn portfolio practice hours, enter the following after the references section of your paper:

Practice Hours Completion Statement DNP-960

I, (INSERT NAME), verify that I have completed (NUMBER OF) clock hours in association with the goals and objectives for this assignment. I have also tracked said practice hours in the Typhon Student Tracking System for verification purposes and will be sure that all approvals are in place from my faculty and practice mentor.

DNP 960 Topic 8 Practice Hours Portfolio – DPI Project Courses

The Typhon Tracking System will be used to document and follow the status of your practice immersion hours throughout this and every subsequent course. Learners must be able to document a minimum of 33 concurrently or previously logged practice hours in association with this course, which will contribute to fulfillment of the total required 1,000 post-baccalaureate practice hours by the conclusion of the program.

Please review the Practice Hours Portfolio Required Elements itemized below, then review the Guidelines for Graduate Field Experience Manual document in the in the DC Network for details on what may or may not qualify as practice hours.

Practice Hours Portfolio Required Elements

The Practice Hours Portfolio (using the Typhon Student Tracking System) will include all of the following elements:

  1. Individual Success Plan signed off by mentor.
  2. Case log of actual clock hours applied to doctoral level learning outcomes.
  3. Learner evaluations: one by faculty (final).
  4. Current and updated CV. (Update each course as necessary.)
  5. Faculty approvals of the Individual Success Plan and documented practice immersion hours. (Learner is responsible for obtaining approvals.)
  6. Practice mentors’ approval of the Individual Success Plan and documented practice immersion hours. (Learner is responsible for obtaining approvals.)

Practice Hours Completion Statement

Learners will track their practice hours within the Typhon Tracking System throughout each course and via the Practice Hours Completion Statement provided in this assignment.

Complete the following statement in a Word document, submit it to the instructor, and complete the Typhon Tracking System entries appropriate for this course.

KINDLY ORDER NOW FOR A RESOURCEFUL, CUSTOM-WRITTEN AND PLAGIARISM-FREE PAPER

Practice Hours Completion Statement DNP-960

I, (INSERT NAME), verify that I have completed (NUMBER OF) practice hours in association with the goals and objectives for this course. I have also tracked said practice hours in the Typhon Student Tracking System for verification purposes and will be sure that all approvals are in place from my faculty and practice mentor.